Reasons Behind Treadmill Leaves Black Dust

If you have noticed that your treadmill belt left black dust on the floor after using it for a while, it is probably time to lubricate it. If you do not know how to lubricate treadmill read this. When you run on a treadmill, the belt goes through a lot of wear and tear, especially if you are running very fast. It is completely normal for the black powder to accumulate on the belt. It is even completely safe as long as you regularly clean it. Here are a few things to know about how to lubricate a treadmill belt so that it will stay in good shape for many years.

Find Good Product Online

Many people prefer to use lubrication products for treadmills. These can be found in local gyms or sports stores. These products are fairly inexpensive and are easy to use. However, they do not actually protect your treadmill from damage. If you leave the lubricant on too long, it will begin to break down. Lubrication products also have a tendency to leave the area of the belt that lies between the deck and the frame exposed.

Dust Build Up

It is entirely possible for you to see dust on your treadmill belt. The reason behind treadmill leaving black dust is that the dust gets kicked up off the deck and onto the belt. It is also possible for dirt and debris to get kicked up onto the belt as well, though usually only the top area is visible. Either way, dust can build up and make your treadmill wear out prematurely. Here are some tips that you can use to help you stop your treadmill from leaving black dust on the floor.

Belt Friction

You may have already noticed that when you use your treadmill, it makes noises. These noises are actually caused by belt friction. If you want to stop your treadmill from leaving black dust on the ground, you need to lubricate the treadmill belts.

Oil Vs Water Based Lubricants

There are many different lubricants available for treadmill use. Some people prefer to use water-based lubricants, because they tend to be more cost effective. Some water-based lubricants will clean easier than other lubricants, and they are also more environmentally friendly. However, oil lubricants tend to work better with treadmill use and have been found to be far more durable than water-based lubricants. Regardless, of which type of lubricant you choose, however, you should always use a lubricant when the machine is idling, and then use another type of lubricant for running, walking, or jumping.

Check Regularly

You also need to check the treadmill belt itself often to make sure there isn’t any build up of dust. In fact, if you aren’t careful, you might be able to see dust building up on the belt. You can clear the dust with compressed air, but if the dust just won’t come off, you will need to lubricate the belt. This should take place every few months, or, in the case of a very old treadmill, every few years.

Read Complete Instructions

Treadmills come with detailed user instructions, but it is still wise to read these over carefully before beginning to use your new treadmill. Make sure you understand exactly how the lubricants and lubricant sprays work, and how they should be applied. Again, oil lubricants tend to work best with treadmills that use a belt, and oil-based lubricants are the recommended ones. It is also important to note that lubricants do not necessarily solve all problems with running a treadmill. For example, when a treadmill’s belt is worn out from constant use, it won’t work as well as it did when it was brand new.

Clean the Filter

The most common reason behind treadmill leaving black dust is simply because the filter has become clogged. If this happens to you, take a look under the hood and make sure the filter is not dirty or clogged. If you have no idea what the filter looks like, look at it under the hood and get an idea of how it works. Clean it gently with a vacuum cleaner to remove any dirt or dust particles that may be stuck inside. Filter changes should be done every few months for optimal performance.